| SPECIFICATIONS |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| CRT Type/accelerating voltage |
150mm rectangular with internal graticule 8 ?10 div. (1div.=10mm) /approx. 12 kV |
| Vertical Axis (CH1, CH2) |
|
Sensitivity |
5 mV to 5 V/div. |
?2% |
| 1 mV, 2 mV/div. |
?5% |
| Attenuator |
1-2-5 step, 12 ranges, fine adjustable within the selected range |
| Input Impedance |
1 MΩ ?1%, approx. 20 pF |
| Frequency Response |
5 mV to 5 V/div. |
DC: DC to 100 MHz (within -3 dB)
AC: 5 Hz to 100 MHz (within -3 dB) |
DC: DC to 50 MHz (within -3 dB)
AC: 5 Hz to 50 MHz (within -3 dB) |
| 1 mV, 2 mV/div. |
DC: DC to 20 MHz (within -3 dB)
AC: 5 Hz to 20 MHz (within -3 dB) |
| Rising Time |
5 mV to 5 V/div. |
approx. 3.5 ns |
approx. 7 ns |
| 1 mV, 2 mV/div. |
approx. 17.5 ns |
| Signal Delay Time |
Leading edge can be confirmed using a square wave that has a rising time of less than this unit |
| Crosstalk |
-40 dB (at 1 kHz) |
| Max. Input Voltage |
800 Vp-p or 400 V (DC AC peak, 1 kHz) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Vertical Axis (CH3) |
| Sensitivity |
0.1 V, 0.5 V/div. ? 2% |
| Attenuator |
0.1 V, 0.5 V/div. |
0.1 V/div. |
0.1 V, 0.5 V/div. |
0.1 V/div. |
| Input Impedance |
1 MΩ ?1%, approx. 20 pF |
| Frequency Response |
DC to 100 MHz (within -3 dB) |
DC to 50 MHz (within -3 dB) |
| Rising Time |
Approx. 3.5 ns |
Approx. 7 ns |
| Signal Delay Time |
Leading edge can be confirmed using a square wave that has a rising time of less than this unit |
| Max. Input Voltage |
100 Vp-p or 50 V (DC AC peak, 1 kHz) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Vertical Axis |
| Operation Mode |
CH1, CH2, CH3, ADD, ALT, CHOP |
| Chopping Frequency |
Approx. 250 kHz |
| Polarity Inversion |
CH2 only |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Horizontal (CH2 Input, except ?10 MAG) |
| Sensitivity |
5 mV to 5 V/div. |
?3% |
| |
1 mV, 2 mV/div. |
?5% |
| Input Impedance |
Same as vertical axis (CH2) |
| Frequency Response |
DC |
DC to 1 MHz ( -3 dB) |
| AC |
5 Hz to 1 MHz ( -3 dB) |
| X-Y Phase Difference |
Less than 3?at 100 kHz |
| Operation Mode |
Switchable to X-Y mode with H.MODE key (CH1: Y axis, CH2: X axis) |
| Max. Input Voltage |
Same as vertical axis (CH2) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Sweep |
| Sweep Mode |
A, ALT, B, X-Y |
| Sweep Time |
A Sweep |
0.5 s to 50 ns/div. ? 2%, 1-2-5 step, 22 ranges, fine adjustable within the selected range |
| B Sweep |
50 ms to 50 ns/div. ? 2%, 1-2-5 step, 19 ranges |
| Sweep Magnification |
?10 ?5%, (?8% at 0.5 譻, 0.1 譻 and 50 ns/div. ) |
| Linearity |
?3% (?5% at ?10 MAG mode) |
| Hold Off |
A Sweep, continuously variable from NORM position |
| Trace Separation |
B Sweep is continuously variable ?4 div. with respect to A sweep. |
| Delay Sweep Mode |
AFT.D |
Continuous delay (After Delay) |
| B TRG'D |
Synchronous delay (B TRIG'D): Synchronized with trigger signal |
| Delay Time |
Continuously variable from 0.2 div. to 10 div. (0.5s/div. to 50ns/div.) |
| Delay Time Error |
?(3% of setting value 1% of full scale) (0 to 300 ns) : CS-5400, CS-5450 ?4% of reading value : CS-5405, CS5455 |
| Delay Jitter |
20000 (10 times of A Sweep setting value) : 1 (at A Sweep 1 ms/div, B Sweep 1 譻/div) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Triggering Mode |
| Trigger Mode |
AUTO, NORM, FIX, SINGLE, RESET |
| Trigger Sources |
VERT, CH1, CH2, CH3, LINE |
| Trigger Coupling |
AC, HF-REJ, DC, TV-F, TV-L |
| Trigger Sensitivity (NORM MODE) |
Coupling |
Frequency |
NORM |
FIX* |
Frequency |
NORM |
FIX* |
| AC |
10Hz to 50MHz |
1.0 div |
1.5 div |
10Hz to 20MHz |
1.0 div |
1.5 div |
| |
50MHz to 100MHz |
1.5 div |
2.0 div |
20MHz to 50MHz |
1.5 div |
2.0 div |
| HF-REJ |
10Hz to 10kHz |
1.0 div |
1.5 div |
10Hz to 10kHz |
1.0 div |
1.5 div |
| |
10 kHz or more |
> min |
> min |
10 kHz or more |
> min |
> min |
| DC |
DC to 50MHz |
1.0 div |
1.5 div |
DC to 20MHz |
1.0 div |
1.5 div |
| |
50MHz to 100MHz |
1.5 div |
2.0 div |
20MHz to 50MHz |
1.5 div |
2.0 div |
| TV-F, TV-L |
Composite video signal |
1.5 div |
Composite video signal |
1.5 div |
| |
(Above values are obtained with the signal input of: AUTO: 40 Hz or more, FIX: 50 Hz or more Internal sensitivity indicated as the amplitude on the CRT. Sensitivity in HF-Rej mode ">min" denotes the amplitude required for synchronization will increase.) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Calibration Signal |
| Waveform |
Square wave |
| Polarity |
Positive |
| Amplitude |
1 Vp-p ?1% |
| Frequency |
1 kHz ? 0.1% |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Intensity Modulation |
| Input Voltage |
Dims at TTL high level ( 5V) |
| Input Impedance |
Approx. 10 kΩ |
| Frequency Response |
DC to 5 MHz |
| Max. Input Voltage |
84 Vp-p or 42 V (DC AC peak, 1 kHz) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| CH1 Signal Output (50W Load) |
| Output Voltage |
Approx. 50 mVp-p/div. |
| Output Impedance |
Approx. 50Ω |
| Frequency Response |
5 mV to 5 V/div. |
100 Hz to 100 MHz (-3 dB) |
100 Hz to 50 MHz ( -3 dB) |
| |
1 mV, 2 mV/div. |
100 Hz to 20 MHz (-3 dB) |
| Trace Rotation |
Enables trace rotation adjustment by semi-fixed controller on the panel. |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Power Requirements |
| Input Voltage |
AC 100/120/220/230 V (?0% ) |
| Frequency |
50 Hz / 60 Hz |
| Power Consumption |
Max.56W,
Max.69VA |
Max. 45 W,
Max. 58 VA |
Max. 55 W,
Max. 68 VA |
Max. 44 W,
Max. 57 VA |
| Insulator Voltage |
AC 1.5 kV, 1 minute |
| Insulator Resistance |
More than 100MW at DC 500 V |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Dimensions/Weight |
| Dimensions (W ?H ?D) |
305 ?150 ?400 mm /(344 ?165 ?459 mm, Maximum dimensions ) |
| Weight |
Approx.9.3kg |
Approx. 8.8 kg |
Approx.9.3kg |
Approx. 8.8 kg |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Operating Environment (limited as indoor use) |
| Altitude |
Below 2000 m |
| Overvoltage Category |
II |
| Pollution |
2 |
| Operating Temperature & Humidity |
0 to 40癈, 85% or less (with no condensation) |
| Storage Temperature & Humidity |
-20 to 70癈, 85% or less (with no condensation) |
| Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| Accessories |
|
Probe |
PC-51(2) |
PC-59 (2) |
PC-53 (2) |
PC-54 (2) |
| |
Operation Manual (1)/Adjusting Screwdriver (1)/Power Cable (1)/Replacement (1) |
|
Readout Section (CS-5400, CS-5450 only) |
| Panel Setup Value |
CH1, CH2 scale factor (with probe detection), CH3 scale factor, V-UNCAL, ADD, INV, A/B Sweep scale factor (MAG conversion, "*" is displayed in MAG mode), X-Y, Sweep UNCAL, DELAY, TIME, B TRIG'D |
Cursor Measurement
ΔV1 only in X-Y mode (Measures between DREF and cursor except the parameter automatic measurement) |
ΔV1: Voltage display by converting CH1 scale factor
ΔV2: Voltage display by converting CH2 scale factor
ΔV3: Voltage display by converting CH3 (0.1V/div. or 0.5V/div.) scale factor
ΔT : Time display by converting A Sweep scale factor
Δ1/T: Frequency display by converting Sweep scale factor |
| DCV, Vp-p, FRQ, PER |
Display the parameter measurement value by automatic measurement function |
| VARIABLE or A VARIABLE at UNCAL |
RATIO: Voltage ratio, time ratio display with 5 div. on the CRT as 100%
PHASE: Phase difference display with 5 div. on the CRT as 360?br> DCV >, Vp-p >: Display ">" and inform that the input signal is larger than measurement value on CRT |
| Resolution/Measurement Error |
10 bits/? 4% |
| Measuring Range |
Vertical: More than ? 3.6 div. from the center of CRT
Horizontal: More than ?4.6 div. from the center of CRT |
| Parameter auto setting function |
Each parameter is measured and displayed for the signal selected as the trigger signal source from CH1 or CH2 |
| Frequency (FRQ) |
Mode selectable in Cursor mode. Measured with internal counter to be displayed |
| Frequency Range |
CS-5400: 2 Hz to 100 MHz CS-5450: 2 Hz to 50 MHz |
| Effective Digits/Accuracy |
5 digits/0.01% ?1 digit |
| Measurement Sensitivity |
Same as trigger sensitivity |
| Period (PER) |
Mode selectable in Cursor mode. Measured with internal counter to be displayed |
| Measurement Range |
CS-5400: 0.5 s to 10 ns CS-5450: 0.5 s to 20 ns |
| Effective Digits/Accuracy |
5 digits/0.01% ? digit |
| Measurement Sensitivity |
Same as trigger sensitivity |
| AC Voltage (Vp-p) |
Mode selectable in Cursor mode. Peak-to-peak voltage is measured and displayed |
| Measurement Range |
10 Hz to 1MHz: 0.5 div. to Effective CRT area 1MHz to 5MHz: 2.0 div. to Effective CRT area |
| Frequency Range |
10 Hz to 5 MHz |
| Effective Digits |
3 digits |
| Accuracy |
10 Hz to 40 Hz: ?{8% attenuator setup value (V/div) ?0.04 div}
40 Hz to 1 MHz: ?{3% attenuator setup value (V/div) ?0.04 div}
1 MHz to 5 MHz: ?{5% attenuator setup value (V/div) ?0.04 div} |
| DC Voltage (DCV) |
Mode selectable in Cursor more. Average DC voltage is measured and displayed |
| Sensitivity |
0.5 div. to Effective CRT area |
| Effective Digits |
3 digits |
| Accuracy |
?{3% attenuator setup value (V/div) ?0.04 div} |
| Auto Setup |
For CH1, CH2, Vertical axis attenuator, Sweep range, Vertical position, Horizontal position are automatically setup |
| Period |
1.5 to 5 periods (H.Variable,: CAL mode, for input signal up to 10 MHz) |
| Amplitude |
Within effective CRT area (within 1/2 of effective CRT area in dual-trace mode) |
| Frequency (Sine wave) |
CS-5400: 50 Hz to 100 MHz, CS- 5450: 50 Hz to 50 MHz |
| Position |
Vertical axis: 1 channel ; almost center of CRT, 2 channel ; CH1 approx. 2 div., CH2 approx. -2 div. from the center of CRT
Horizontal axis: starts from left edge of CRT scale |
| Backup |
Panel setup values are backed up by built-in battery. Battery service life approx. 30,000 hours (with room temperature) |
商品搜索
