[联系我们]
[网站地图]
|
[产品中心] [联系我们] [网站地图] |
 |
 |
品 牌:美国福禄克 FLUKE 型 号:PM5712 厂 家:美国 市场价：￥—/台 优惠价：电询0532-83820267 |
美国PM5712 脉冲函数发生器详细技术指标： 技术指标·Technical specifications ·Time parmeters ·Pulse repetition time:20ns to 1s(1Hz to 50MHz) ·Pulse delay:10ns to 100ms ·Pulse duration:10ns to 100ms ·Duty factor:0.00000001 to 0.99999999(high duty factors require inverted mode) ·Main output pulse characteristics ·Pulse amplitude:0.2V to 10V at Z=50Ω ·Source impedance ·10V range:Current source ·5V and lower ranges:50Ω ·Polarity ·PM5712:+only.Pulses within-5Vto +10V ·possible,using DC offset and normal or inverted ·Transition times ·Corresponding to 10 to 90% of pulse ampitude,at amplitudes of ≥5Vand Z=50Ω ·continuous control of rese-and fall-times ·within each of 6 ranges. ·PM5712:4ns fixed ·DCoffset at Z=50Ω ·PM5712:-5V to +2V ·Max outout voltage:Pulse amplitude and dc offset max.+10V ·Waveform aberrations:<±5% of set amplitude ·Pulse modes: ·Single pulse(delayable) ·Double pulse ·T/2,50%duty cycle,50±20%dutycycle in 20ns and 100ns repetition range ·Logic mode:Normal or inverted ·Output protection:Short or open circuit safe ·Auxiliary pulse output characteristics ·Pulse amplitude:+2.5V into 50Ω or +4.5V open circuit,TTL-compatible ·Source impedance:50Ω ·Pulse waveforms:Single pulse in single and T/2 pulse modes.Double pulse in double pulse mode. ·Pulse advance:Approx.12ns ahead of main single or double pulses ·Oputut protection:Short or open circuit safe ·Internal clock output(sync.output) ·Function:Pre-trigger output,mian output pulse is delayable with respect to sync. output ·Amplitude:+1.5V at Z=50,+3V open circuit ·Source impedance:50Ω ·Pulse advance:Approx 40ns ahead of main single pulse with pulse delay set to 10ns ·Output rotection:Short or open circuit safe ·External operating modes ·TRIGG:Each input pulse,generates an output pulse ·GATE:Synchronous gating.Input signal disables output pulses ·DURATION:Pulse mode T/2gives output pulses with same duration and retetition rate as external input signal,other waveform parameters are set via the generator ·MANUAL:Single shot push button simulate external signal for triggering,gating and duration ·External input ·Function:For xeternal trigger,gate and duration ·Range:DC to 50MHz ·Coupling:DC ·Input impedance:Approx.220Ωat <1.5V,approx.800Ωat >1.5V ·Trigger level:≤+1V ·Trigger slope:Positive ·Pulse delay:Approx.50ns from input to main single pulse with delay set to 10ns ·Max.input voltage without damage:±12V ·General specifications ·Power requirements ·Line:100,115,200or 230V±15% ·Line frequency:50to 400Hz ·Power consumption:70VA ·Environmental conditions ·Temperature range ·Operating:0to 40℃ ·Storage:-40℃to 70℃ ·Safety:According to CE-regulation 73/23 ·EN61010-1 CAT II,POllution Degree2 ·EMC:Accordingto CE regulation 89/336: /emission according to EN 550081-1,EN55022,Class BEN60555-2.Immunity according to EN 50082-1,inclusive IEC 80-2,-3,-4,-5. ·Mechanical specifications ·Size:210mmW×130mmH×275mmL(8.3in W×5inH10.8inL) ·Weight:4kg(8.8lb) ·Included with instrument:Manual,power cord |
优惠价：电询0532-83820267
PM5712 脉冲函数发生器相关仪器仪表： |
|
 商品搜索 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
